I had a question today about the units which have self-cleaning electrodes. The Enagic Leveluk machines DXII and SD501 both come with an automatic, self-cleaning system. The system is activated when there is any buildup present, or when the machine has been used for 15 minutes.

This is one reason why I have the voice turned off — otherwise I would constantly hear “Notice of Cleaning” from the machine. This self-cleaning helps your machine to produce gallon after gallon of anti-oxidant kangen water.

I was also asked about the difference between the ORP readings in a picture and he ORP readings from the gauge used in the videos. If you haven’t seen the videos testing ORP, pH and a demonstration of the SD501, please fill out the form at our main kangen water site and you will have instant access to them.

In the picture, the ORP shows -387 and in the video, the ORP is -250. There are some reasons behind this difference.

First, the water in the video may have been poured some time before. I believe there may be some dissipation in ORP levels if the water is allowed to sit in the open air. I will be posting further detailed information about this shortly.

Another factor is the source water. The videos were made in LA, so they are making kangen water from LA tap water. That truly is a miracle!

Most municipal water supplies are adequate, however if you connected the machine up to a tank of dirty water, it would still clean and electrolyze it, but would produce kangen water at a much slower rate.