Advertisement
Shannon has been speaking to the Exploratorium in SF, It looks like we will be doing something there in April, a few weeks before we head to Makers fair. I picked up some really incredible books of 1890's era technology in Munich when I was there over Christmas. Many people would be suprised to know that a form of "fax" machine existed then.
One Book has 100's of incredible etchings of everything from "modern" street lamps to the laying of the transatlantic telegraph cable.
After Shannon and I looked at it we came of with a story that will use some of the etchings.
"The Iron Leviathan" the hunting and use of clockwork Whales.
"these creatures are incredibly valuable, as they provide a source of quality gears and other mechanical parts, along with a source of high quality lubricant." (excerpt).
A must see in Munich is the Deutsches Museum a unbelieveable collection of vintage steam engines among other things.
Kimric
One Book has 100's of incredible etchings of everything from "modern" street lamps to the laying of the transatlantic telegraph cable.
After Shannon and I looked at it we came of with a story that will use some of the etchings.
"The Iron Leviathan" the hunting and use of clockwork Whales.
"these creatures are incredibly valuable, as they provide a source of quality gears and other mechanical parts, along with a source of high quality lubricant." (excerpt).
A must see in Munich is the Deutsches Museum a unbelieveable collection of vintage steam engines among other things.
Kimric
Advertisement
Advertisement
-
Re: Upcoming things
Mon, February 2, 2009 - 2:52 PMWow how exciting, I thought those plates you had at Edwardian were lovely, I was thinking how nice one of them would be as a tattoo.... do you think the Exploratorium thing would be something you all need cast for? -
-
Re: Upcoming things
Fri, April 24, 2009 - 10:40 AMA lot have things have fallen through due to funding cuts the explatorium event is not happening, but we will be at the maker fair, and even
bigger news it we are going to burning man. We have obtained a steam engine out of a Stanley steam car, so we should be able to power the Haul on steam this year.
Kimric -
-
Re: Upcoming things
Fri, April 24, 2009 - 8:56 PMA Stanley engine you say? Very kewl. How big a boiler you got?
Oh and speaking of events do you know about Dream Machine, at Half Moon Bay airport this coming Sunday? Neverwas Haul would be an outstanding attraction there! -
-
Re: Upcoming things
Fri, April 24, 2009 - 11:41 PMIt looks like it is a 20hp Stanley, I am going to do a pressure test in the next couple of weeks.
-
-
-
-
Re: Upcoming things
Tue, March 31, 2009 - 1:07 PMWe are going to do a presentation at Dorkbot ,Wed April 8th here is some of the stuff you will see
www.flickr.com/photos/266...3400248855/
Here is the info for the event
dorkbot.org/dorkbotsf/ -
-
Re: Upcoming things
Tue, March 31, 2009 - 7:56 PMHey tell me more about that steam siren you made; they're notoriously finicky and I've seen one or two that just flat out didn't work. What's the secret? PS Stylin' chapeau ya got there.. ;-) -
-
Re: Upcoming things
Wed, April 1, 2009 - 9:22 AMNot much to say, take a automotive steering pump, run steam in to what was the high pressure output.
Kimric -
-
Re: Upcoming things
Wed, April 1, 2009 - 10:31 AMDidja make a 'rocket nozzle' style venturi for the steam inlet? -
-
Re: Upcoming things
Sat, April 4, 2009 - 1:50 PMNo ,I just tapped it for a pipe thread and hooked it up to a globe valve. I don't even oil it.
I did weld a toy trumpet bell to what was the hydraulic inlet pipe. -
-
Re: Upcoming things
Fri, April 24, 2009 - 10:41 AMIf you change the size of the pulley you can change how fast it runs up also.
-
-
-
-
-
-
Re: Upcoming things
Thu, May 21, 2009 - 11:40 PMWe will be at maker faire again this year, lots of new stuff has been built, and we plan to be at Burning man also.
A calliope Shannon and I have been working on will be ready (more or less) by this weekend, so it will be there.
I modified the Uniflow steam engine so it is a regular single acting engine , with overhead cam valves.
We have been working like mad on goggles, so we should have plenty there for sale. -
-
Re: Upcoming things
Sun, June 14, 2009 - 10:38 AMSeveral things are coming up;
July 17th Benefit for Neverwas Haul, we will be doing a fancy formal dinner with music and the lot. Vendor space will be available at this event, some details are being ironed out at this time. Event will be in Berkeley.
Neverwas Haul is going to Burning Man! Again! the benefit is to raise money to make the drive train more reliable, and to get it done in time for serious testing before we go.
Many thanks to people who purchased our wares at Maker faire, our space rent for the Haul and workshop is covered through Sep.
Up on etsy at www.neverwas.etsy.com is our new line of Sky Pirate goggles and monocles Shannon has been working on this concept and we put a few together las week ,check em out.
First Engineer
Kimric Smythe
-